84
FILTER
WATER IN
(TO POOL
OR SPA)
PUMP
SOLAR
SENSOR
SOLAR COLLECTOR
INLET OUTLET
SOLAR 3-WAY
VALVE
CHECK
VALVE
Figure 156. Solar Heater Components in the Piping
4. Follow the general instructions for wiring external
devices and route the wires for the "Solar sensor" and
"Solar 3-way valve" to the control box of the heater.
5. Inside the control box of the heater, connect the
wires for the "Solar sensor" to the control board
terminal labeled as "SOLAR" [P11] using the harness
adapter labeled as "Solar Temperature Sensor /
Auxiliary Safety Input" provided in the accessories
bag. Connect the Red with White wires for a 10K
temperature sensor and use the terminal [P9] to
connect a standard 3-way valve actuator for the
"Solar 3-way valve". Refer to Figure 157 for details.
6. Enable the "Solar Heating" option and congure
the necessary parameters based on your system
requirements and operation preferences from the
Installer menu. Refer to section 13 in page 21 for
further details on conguring the Solar Heating
function.
P3
P11
P9
P2
FAN RVS COMP
SOLAR HEAT
& AUX INPUT
WPS LPS HPS
Solar 3-way valve
actuator
Solar Sensor (10K)
Figure 157. Solar Heat & Auxiliary Input
To Next Page
Loading...
