Rheem RBHP-25J11SH7 - User Manual

INSTALLATION INSTRUCTIONS
92-20521-44-06
SUPERSEDES 92-20521-44-05
WARNING
▲WARNING
!
These instructions are intended as an aid to qualified licensed
service personnel for proper installation, adjustment and
operation of this unit. Read these instructions thoroughly before
attempting installation or operation. Failure to follow these
instructions may result in improper installation, adjustment,
service or maintenance possibly resulting in fire, electrical
shock, property damage, personal injury or death.
ISO 9001:2008
AIR HANDLERS
(-)BHP
• MODELS FEATURING R-22 REFRIGERANT
• MODELS FEATURING EARTH-FRIENDLY R-410A REFRIGERANT
• MODELS FEATURING ELECTRIC HEAT WITHOUT INDOOR
COOLING COIL
refrigerant

Rheem RBHP-25J11SH7 Specifications

General

Brand	Rheem
Model	RBHP-25J11SH7
Category	Air Handlers
Language	English

Summary

1.0 SAFETY INFORMATION

General Safety Warnings

Provides essential safety guidelines for installation and operation of HVAC units.

Duct Leak and Pollutant Hazards

Warns about risks of duct leaks drawing pollutants into living spaces.

Installation and Service Personnel Safety

Emphasizes qualified personnel for installation, service, and electrical safety.

2.0 GENERAL INFORMATION

3.0 ELECTRICAL WIRING

Power Wiring

Details electrical power requirements and connection procedures.

Control Wiring

Grounding

Emphasizes proper grounding for electrical safety.

4.0 DUCTWORK

Duct Leakage and Fire Hazard Warnings

Critical warnings regarding supply air plenum, ductwork, and fire risks.

Duct System Design and Installation

Guidelines for designing and installing ductwork according to codes and standards.

5.0 REFRIGERANT CONNECTIONS

Flowcheck Pistons and Installation

6.0 CONDENSATE DRAIN TUBING

Condensate Drain Installation and Trapping

Details connecting and installing condensate drain lines, including trap requirements.

8.0 AIRFLOW PERFORMANCE

Airflow Operating Limits

Airflow Performance Data Tables

11.0 PRE-START CHECKLIST

Pre-Start Checklist Items

13.0 REPLACEMENT PARTS

Ordering Replacement Parts