Rheem RBHP-24J07SH4 - User Manual

INSTALLATION INSTRUCTIONS
92-20521-44-06
SUPERSEDES 92-20521-44-05
WARNING
▲WARNING
!
These instructions are intended as an aid to qualified licensed
service personnel for proper installation, adjustment and
operation of this unit. Read these instructions thoroughly before
attempting installation or operation. Failure to follow these
instructions may result in improper installation, adjustment,
service or maintenance possibly resulting in fire, electrical
shock, property damage, personal injury or death.
ISO 9001:2008
AIR HANDLERS
(-)BHP
• MODELS FEATURING R-22 REFRIGERANT
• MODELS FEATURING EARTH-FRIENDLY R-410A REFRIGERANT
• MODELS FEATURING ELECTRIC HEAT WITHOUT INDOOR
COOLING COIL
refrigerant

Rheem RBHP-24J07SH4 Specifications

General

Model	RBHP-24J07SH4
Type	Air Handler
Airflow	1, 200 CFM
Refrigerant	R-410A
Voltage	208/230V
Phase	1
Motor Type	PSC
Cooling Capacity	24000 BTU/H
Heating Capacity	24000 BTU/H
Filter Type	Standard 1" Filter

Summary

Safety Information

General Safety Warnings and Cautions

Consolidates critical safety warnings and cautions regarding installation, operation, and potential hazards.

Ductwork and Electrical Safety

Highlights specific safety warnings related to ductwork installation and electrical connections.

Electrical Wiring

Power, Control, and Grounding Wiring

Covers essential power wiring, control wiring, and grounding requirements for safe unit operation.

Blower Motor and Electric Heat Data

Presents electrical specifications for blower motors and electric heat components.

Ductwork

Ductwork Installation and Safety

Covers essential ductwork installation practices, safety warnings, and compliance requirements.

Refrigerant Connections

Refrigerant Line and Piston Installation

Instructions for installing refrigerant lines, block-off plates, gaskets, and flowcheck pistons.

Condensate Drain Tubing

Condensate Drain Line Setup

Air Filter and Airflow Performance

Airflow Performance Data and Limits

Sequence of Operation

Cooling, Heating, and Emergency Modes

Pre-Start Checklist and Maintenance

Pre-Start Checklist

A comprehensive checklist to ensure proper installation and readiness before unit startup.

Component Replacement