Rheem RBHP-17J07SH1 User Manual

INSTALLATION INSTRUCTIONS
92-20521-44-06
SUPERSEDES 92-20521-44-05
WARNING
▲WARNING
!
These instructions are intended as an aid to qualified licensed
service personnel for proper installation, adjustment and
operation of this unit. Read these instructions thoroughly before
attempting installation or operation. Failure to follow these
instructions may result in improper installation, adjustment,
service or maintenance possibly resulting in fire, electrical
shock, property damage, personal injury or death.
ISO 9001:2008
AIR HANDLERS
(-)BHP
• MODELS FEATURING R-22 REFRIGERANT
• MODELS FEATURING EARTH-FRIENDLY R-410A REFRIGERANT
• MODELS FEATURING ELECTRIC HEAT WITHOUT INDOOR
COOLING COIL
refrigerant

Rheem RBHP-17J07SH1 Specifications

General

Model Number	RBHP-17J07SH1
Product Type	Air Handler
Phase	1
Motor Type	PSC
Cabinet Type	Upflow/Horizontal
Depth	21 inches
Width	17.5 inches
Shipping Weight	95 lb

Summary

1.0 SAFETY INFORMATION

General Safety Precautions

Essential safety warnings and precautions for installation and operation.

2.7 VERTICAL UPFLOW

2.8 VERTICAL DOWNFLOW

2.9 HORIZONTAL

3.0 ELECTRICAL WIRING

3.1 POWER WIRING

Details on power supply, disconnects, conductors, and wiring connections.

3.2 CONTROL WIRING

Guidelines for routing and connecting low voltage control wiring.

3.3 GROUNDING

Instructions and warnings regarding proper unit grounding.

4.0 DUCTWORK

5.0 REFRIGERANT CONNECTIONS

6.0 CONDENSATE DRAIN TUBING

9.0 SEQUENCE OF OPERATION

9.1 Cooling (cooling only or heat pump)

Describes the sequence for cooling operation.

9.2 Heating (electric heat only)

Describes the sequence for electric heat-only operation.

9.3 Heating (heat pump)

9.4 WATT RESTRICTOR (Heating - Heat Pump)

9.5 DEFROST SEQUENCE

9.6 EMERGENCY HEAT (Heating of Heat Pump)

10.0 CALCULATIONS

11.0 PRE-START CHECKLIST

12.0 MAINTENANCE

12.5 BLOWER ASSEMBLY REMOVAL AND REPLACEMENT

Steps for removing and replacing the blower assembly.

12.6 ELECTRIC HEATER REPLACEMENT

Steps for replacing electric heater elements.

12.7 MOTOR REPLACEMENT

Procedures for removing and replacing the indoor blower motor.

13.0 REPLACEMENT PARTS