To Next PageTo Next Page
Need help?Do you have a question about the Rheem RH1T3617STANJA and is the answer not in the manual?
General| Model | RH1T3617STANJA |
|---|---|
| Category | Air Handlers |
| Brand | Rheem |
| Refrigerant | R-410A |
| Tonnage | 3 Ton |
| Nominal Cooling Capacity | 36, 000 BTU/h |
| Phase | 1 |
| Width | 21 inches |
| Motor Type | PSC |
| Heating Type | Electric |
| Cabinet Features | Insulated |
| Voltage | 208/230V |
| Air Flow Range | 600-1200 CFM |
| Cabinet Type | Galvanized Steel |
| Depth | 21 inches |
| Filter Type | 1-inch or 2-inch pleated filter (optional) |
Provides critical safety information regarding electrical hazards, unit operation, and ductwork connections.
Advises against operating without filters and outlines safety requirements for supply air plenum and ductwork.
Discourages unit use during construction and warns about carbon monoxide hazards from fuel-burning devices.
Warns about risks from duct leaks, migration of pollutants, and improper installation impacting warranty.
Highlights the importance of adhering to installation manuals, codes, and proper refrigerant charge for performance.
Lists required tools and provides specifications and safety information for R-410A refrigerant.
Covers ductwork installation requirements, including compliance with standards and design considerations.
Explains the need for external filtration and provides guidance on filter type, sizing, and placement.
Covers refrigerant line connections, brazing, leak testing, evacuation, and charging.
Provides guidelines for condensate drain line installation, pitching, and trap requirements.
Details condensate drain trap installation, insulation, and testing procedures for proper drainage.
Covers electrical wiring, including voltage configuration, grounding, and power wiring.
Provides electrical data for (-)H1P models with various electric heater kits installed.
Presents further electrical data for (-)H1P models with electric heaters, including voltage and amperage specifications.
Lists electrical data for (-)H1T models with various electric heater kits, including voltage and amperage.
Continues the electrical data for (-)H1T models with electric heaters, focusing on circuit breaker and amperage ratings.
Covers airflow performance data, operating limits, and speed selection for air handlers.
Guides on selecting blower speed for (-)H1P and (-)H1T models based on static pressure and motor type.
Presents airflow performance data for 240V (-)H1P PSC motor models under various static pressures.
Continues airflow performance data for 240V (-)H1P PSC motor models, including various heater configurations.
Provides airflow performance data for 115/208/480V (-)H1P PSC motor models across different static pressures.
Continues airflow data for (-)H1P PSC motors, covering various voltages and heater options.
Presents airflow data for (-)H1T ECM motor models across voltages, static pressures, and heater options.
Concludes airflow performance data for (-)H1T motors, covering various voltages, static pressures, and heater kW.
Provides a checklist of essential items to verify before starting the air handler unit.
Lists common problems with air handlers and provides suggested causes and fixes for troubleshooting.
