Rheem RTGH-RH10DV - Agm

87
1.Closethegasshuto󰘯valve.
2.Turnthepowero󰘯.
3.Closeallwatervalve(HotwaterandDHW)
4.DisconnecttheelectricalconnectiontotheAGM.
5.Byusingahandscrewdriver,remove2screwsof
theAGM.
6.ReplaceAGMwithnewcomponent.
7.Assembleinthereverseorderasthepartwas
removed.
8.Openthegasshuto󰘯valve.
9.Turnthepoweron.
10.Openwatervalves(HotwaterandDHW)
11.Turntheunitonandensureproperoperation.
MaincomponentsReplacementInstructions
Chapter5ReplacementInstructions
10.AGM
■ Warning : AGM Mounting Position.
NOTE
AGMcomeswiththeGasMixerBody,iftheGas
MixerBodyisdamaged,replaceit,otherwise this
partisnotused.