33
G
B
ACCESSORIES
For the connections and the technical data of the optional equipments follow the relevant handbooks.
HANGING RACK
FORK TYPE SUPPORT
COLUMN
HANGING SUPPORT FOR
BOOM ARM Ø 80
FIXING HUB
for Ø 80 mm boom arm
code ACG8548G
for Ø 60 mm boom arm
code ACG8552
ARTICULATED ARM
L = 3 m code ACG8223
L = 4 m code ACG8224
PAY ATTENTION: for articulated boom arm more than 4 meters, it is suggested
using a RAPID N barrier.
L = 2 m code ACG8290
L = 3 m code ACG8291
WARNING: Not to use in windy areas.
N.B. It is obligatory to install an Hanging support ACG8283 or one Fork type support
column ACG9130G.
Maximum 200 daily cycles
PHOTOELECTRIC CELL STRIP ON Ø 80 BOOM ARM
code ACG8611 + ACG7090
code ACG8285 Fork type support column for all boom
arms code ACG9130G
METALLIC MASS DETECTOR
to open with vehicles
1 channel - 230 Vac code ACG9060
1 channel - 12÷24 Vac/dc code ACG9063
2 channels - 12÷24 Vac/dc code ACG9064
To Next Page
Loading...
