Riccar SUPRALITE RSL1 User Manual

8
CAUTION: First, disconnect the vacuum
cleaner from the electrical outlet.
To remove bottom plate:
1. After unplugging the power cord,
turn the vacuum cleaner over,
exposing the underside.
2. Press the two holding tabs inward
(diagram 11) releasing the bottom
plate. Remove the bottom plate.
To install bottom plate:
1. Install bottom plate, making sure
bottom plate hinges are in place
before setting the plate (diagram
12).
2. Press plate into position until the
plate “clicks” on both sides.
HOW TO REMOVE / INSTALL THE BOTTOM PLATE
11
12

Riccar SUPRALITE RSL1 Specifications

General

Brand	Riccar
Model	SUPRALITE RSL1
Category	Vacuum Cleaner
Language	English