Riccar SUPRALITE RSL1 User Manual

5
3. Place the handle bracket back
into position (diagram 3).
4. Secure with two screws removed
in step 1.
Positioning the power cord:
(Models RSL1 only.)
1. Loosen, but do not remove, the
screw holding the upper cord
hook (diagram 4).
2. Position the cord between the
cord hook and the vacuum tube
(diagram 5). Re-tighten the screw.
3. Once the cord is secured by the
cord hook, proceed with wrap-
ping the cord.
ASSEMBLING THE VACUUM
3
4
5

Riccar SUPRALITE RSL1 Specifications

General

Brand	Riccar
Model	SUPRALITE RSL1
Category	Vacuum Cleaner
Language	English