Your vacuum features a circuit breaker
to protect the machine against damage
due to a surge in the electrical current.
Electrical surging can be a result of,
though not limited to, a jammed
brush roll (i.e. vacuuming up a sock
or throw rug) or a jammed motor fan.
Should your vacuum cleaner experi-
ence a jammed brush roll with the cir-
cuit breaker tripping, first press the
on/off button to the off position and
unplug the unit. Inspect the brush roll
by removing the bottom plate (see
“How to Remove Bottom Plate”) and
remove any debris which may be
causing the jam. Reinstall the bottom
plate (see “How to Install Bottom
Plate”), reset the circuit breaker (dia-
gram 20), plug in power cord, and
turn unit on. If the unit fails to turn
on, return it to an authorized service
center for service.
11
HOW TO RESET THE CIRCUIT BREAKER
Circuit Breaker
Reset Button
20
To Next Page
Loading...
Need help?
General
