Riccar Vibrance User Manual

26
Problem Solving Guide
Thermal motor protection
Your Vibrance is equipped with a
safeguard to recognize when the vacuum
heats up and shuts itself down to protect
your vacuum cleaner. Note that when this
happens, the headlight is still on but the
motor shuts off. Common reasons why a
vacuum may overheat include operating a
vacuum with a full bag or when there is a
clog in the vacuum.
• Unplug the vacuum.
• Inspect your vacuum for a full bag
condition or a hose clog and correct
the problem. Locate the Thermal Motor
Reset button on the back of the vacuum.
Press button and resume vacuuming.
If problem continues, contact your
Authorized Riccar Retailer.
Thermal Reset
If problem persists,
consult owner’s manual
or contact retailer.
1. Unplug machine
2. Locate problem
source (clogged
hose or full bag)
3. Correct problem
4. Press reset button
1. Unplug machine
2. Locate problem
source (clogged
hose or full bag)
3. Correct problem
4. Press reset button

Riccar Vibrance Specifications

General

Type	Upright
Filtration	HEPA
Cord Length	30 feet
Weight	18 lbs
Bagged/Bagless	Bagged
Motor	12 amp
Height Adjustment	Yes
On-board Tools	Yes