Riccar Vibrance User Manual

Name: Riccar Vibrance
Brand: Riccar
Rating: 5 (1 reviews)

32 pages

To Next Page

To Previous Page

Problem Solving Guide

Trouble Shooting

PROBLEM

Vacuum won’t turn on

Vacuum won’t pick up or

low suction

Dust escaping from vacuum

POSSIBLE REASON

• Power cord not ﬁrmly

plugged in

• Blown fuse or tripped

breaker

• Needs service

• Vacuum bag full

• Clogged ﬁlter

• Hose clogged

• Worn brushroll

• Broken belt

• Dust cover not installed

properly

• Filter not installed

correctly

• Vacuum bag not installed

correctly

POSSIBLE SOLUTION

• Plug unit in ﬁrmly

• Check house fuse or

breaker. Replace fuse /

reset breaker.

• Take to Authorized Retailer

(1-888-6-RICCAR)

• Install new bag

• Install new ﬁlter

• Remove obstacle

• Replace brush strips

• Replace belt

• Reinsert the dust cover

and secure latch

• Review ﬁlter installation

(page 20)

• Review bag installation

(page 19)

Any other service should be done by an

Authorized Service Representative.

Service 1-888-6-RICCAR

To locate your nearest retailer, visit our website at

www.riccar.com

Questions and Answers:

S
Scott MercadoJul 26, 2025
Why is my Riccar Vibrance Vacuum Cleaner not picking up or has low suction?
- J
  James DanielsJul 26, 2025
  If your Riccar Vacuum Cleaner isn't picking up dirt or has low suction, here's what might be happening: * The vacuum bag might be full. Install a new bag. * The filter could be clogged. Install a new filter. * There might be a clog in the hose. Remove the obstacle. * The brushroll could be worn. Replace the brush strips. * The belt might be broken. Replace the belt.