Rice Lake 920i User Manual (English)

Other manuals for Rice Lake 920i

Operation Manuals40 pages

Technical Manual40 pages

Installation Manual149 pages

Operator's Manual30 pages

Programming Reference98 pages

Instructions2 pages

Manual28 pages

Options Installation10 pages

Configuration12 pages

Installation Instructions2 pages

Installation Guide6 pages

Installation4 pages

Questions and Answers:

N
nsmithAug 12, 2025
Why is the weight reading unstable on my Rice Lake Touch Panel?
- K
  Kathryn CharlesAug 12, 2025
  If the weight reading on your Rice Lake Touch Panel indicator is unstable, it could be due to moisture in the control panel's circuit board or the load cells' junction box. In this case, dry any areas contaminated with moisture and check for leaks, then reseal. Alternatively, a load cell cable might be pinched or damaged. Contact Rice Lake Weighing Systems or a qualified dealer for support, as cutting the load cell cable will void the warranty and special repair techniques are required.
A
Allison FisherAug 16, 2025
What to do if Rice Lake Touch Panel displays dashes in weight?
- C
  Cory Stone DDSAug 16, 2025
  If you see dashes in the weight display of your Rice Lake Touch Panel, it indicates an over-range or under-range scale condition. Inspect the scale itself. For out-of-range conditions in the total scale display, verify that all scale inputs show positive weight values.
T
Tyler SharpAug 19, 2025
Why won't my Rice Lake Touch Panel weigh the animal?
- H
  howardvincentAug 20, 2025
  If your Rice Lake Touch Panel system isn't weighing animals or completing batches, the weight reading might not be stable enough. This could be due to windy conditions. Check the standstill icon on the display area of the indicator; the system can only start when the standstill icon is displayed.
M
Madeline HarrisAug 23, 2025
How to fix Rice Lake Touch Panel when scale will not ZERO?
- K
  Kenneth BrownAug 25, 2025
  If your Rice Lake Touch Panel scale won't zero, it could be because there's too much weight on the scale, exceeding the allowable zero window. Remove any debris from the scale deck and then try zeroing the scale again. It is also possible that the Zero Window parameter is set incorrectly.
B
Brandon RobertsAug 27, 2025
What causes a blue screen on a Rice Lake Touch Panel?
- S
  scottdicksonAug 27, 2025
  A blue screen on your Rice Lake Touch Panel could be due to corrupt core software. Try resetting or reloading the software. Another possible cause is the LCD contrast control in the indicator, so check that as well.
W
Wayne StoneAug 31, 2025
Why does my Rice Lake Touch Panel have a positive error when loading?
- T
  Thomas EvansAug 31, 2025
  If your Rice Lake Touch Panel scale shows a positive error when loading or a negative error when unloading, suspect a mechanical binding problem. Check for debris around or under the scale, inspect each load cell location for foreign material, check all items running from on the scale to off the scale, and check all gates or gathering panels for contact.
D
Dr. Luis AdkinsSep 4, 2025
What to do if Rice Lake Touch Panel has a negative error when loading?
- H
  heatherhernandezSep 4, 2025
  If your Rice Lake Touch Panel scale displays a negative error when loading or a positive error when unloading, it may be caused by moisture in the electrical system. Dry any areas that are contaminated with moisture, and check for leaks before resealing.
A
Andrew MartinSep 7, 2025
How to resolve Rice Lake Touch Panel hangs in 888 display?
- T
  Tyler KellySep 7, 2025
  If your Rice Lake Touch Panel hangs in the 888 display, the core software may be corrupt. Reset or reload the software to resolve this issue.

Rice Lake 920i Specifications

General

Display	LCD
Processor	32-bit microprocessor
Communication Ports	RS-232, RS-485, Ethernet, USB
Power Supply	AC or DC
Input Voltage	100-240V AC, 50/60Hz or 12-24V DC
Operating Temperature	-10 °C to 40 °C (14 °F to 104 °F)
Enclosure	NEMA 4X/IP66, stainless steel
Load Cell Input	Supports up to 4 load cells
Certifications	NTEP, OIML, CE

Related product manuals

Rice Lake 920i Series

7 pages

Rice Lake 920i Operation Manual

Table of Contents

Other manuals for Rice Lake 920i

Questions and Answers:

Rice Lake 920i Specifications

Related product manuals