How to fix Rice Lake RL-DBS that won't turn on with batteries?
If your Rice Lake Scales do not turn on when using batteries, the batteries may be dead. Try connecting the scale to a power source or replace the batteries.
What to do if Rice Lake RL-DBS Scales displays 'o_Ld' message?
If your Rice Lake Scales displays the message 'o_Ld', it means the weight on the scale is higher than its maximum capacity. Remove some weight to bring it within the scale's limit for normal operation.
What to do if Rice Lake RL-DBS displays 'Err' message?
If your Rice Lake Scales displays the 'Err' message, it means that the RECALL key was pressed without enough weight on the scale. To resolve this, place more than 2 lb, 30 oz on the scale.
What to do if my Rice Lake RL-DBS Scales show o_Ld message?
The o_Ld message indicates that the load on the scale exceeds its capacity. Remove the excess weight to ensure you are using the scale within its specified limits.
Why is my Rice Lake RL-DBS showing questionable weight or not zeroing?
There are several reasons why your Rice Lake Scales might be showing an inaccurate weight or failing to zero: * An external object may be interfering with the scale. Remove any objects from the weighing tray. * The display may not have shown 0.0 before weighing. Remove the baby, zero the scale, and begin the weighing process again. * The scale may not be on a level surface. Place the scale on a stable, level surface and restart the weighing process. * The weighing tray may not be placed properly. Ensure the weighing tray is correctly positioned. * The scale may be out of calibration. Check the scale's calibration with a known weight value.
To Next Page
General