Richter RR20 - Sleep Mode Setting; System Configuration and Reset; Backlight Settings; Factory Reset

11
MODEL: RR20
10. Sleep Mode Setting
The Sleep function works in any mode the Radio is being used in
• With the radio switched on, press the “SLEEP” button to active the
Sleep function then press the “SLEEP” button again to choose the
desired Sleep time 15 / 30 / 45 / 60 / 75 / 90
• The unit will power off after the sleep time selected is reached.
11. Backlight Settings
• Press the DIMMER/ALARM button to adjust the backlight level
between High-Medium-Low or off.
• You can also adjust the backlight in the main menu, quick press
the MENU/SCAN button and rotate the volume dial until you see
“SYSTEM” in the display then press the dial to select. Rotate the dial
again until you see “BACKLIGHT” in the display and press the dial
to select. Here you can rotate the dial to select backlight “Time out”
or “On Level” settings. The Time Out options are “On” or a selection
between 10 to 180 seconds. On level options are High, Medium
or Low.
12. Factory Reset
If you experience any issues with your radio a factory reset can restore
your radio’s software.
To complete a factory reset:
• Press and hold the
button to switch the radio on, then quick
press the MENU/SCAN button and then rotate the volume dial until
you see “SYSTEM” in the display and then press the dial to select,
rotate the dial until you see “Factory reset” in the display and press
the dial to select. Rotate the dial to select “Yes” and press the dial to
conrm.
The radio will then complete a Factory reset and commence a new
DAB Auto scan.