14
Saving Energy
-
--
-Auto Off/ Low Power
The machine automatically turns it-
self off when the job is finished, after
a certain period of time has elapsed.
This function is called “Auto Off”.
Note
❒ You can change the Auto Off time.
See General Settings Guide.
❒ The Auto Off Timer function will
not operate in the following cases:
• When a warning message ap-
pears
• When the service call message
appears
• When paper is jammed
• When the cover is open
• When the “
Add Toner
” mes-
sage appears
• When toner is being replen-
ished
• When the User Tools screen is
displayed
• When fixed warm-up is in
progress
• When the facsimile, printer, or
other functions are active
• When operations are suspend-
ed during printing
• When the On-hook dialing
function is in use
• When a receiver is being regis-
tered in the Address Book or
group dial list
• When the Data In indicator is on
or blinking
KirC2_ENcopyF_FM.book Page 14 Wednesday, April 27, 2005 7:04 PM
To Next Page