Settings You Can Change with the User Tools
121
4
2. Adjust Image
1
/
3
Menu Description
01. Border Erase Width The default width of erased margins in Border Erase mode
can be changed as follows:
• Metric version: 3 – 50mm in 1mm steps
• Inch version: 0.1 – 2.0" in 0.1" steps
Note
❒
Default:
• Metric version:
10mm
• Inch version:
0.4"
02. Center Erase Width The default width of erased margins in Center Erase mode
can be changed as follows:
• Metric version: 3 – 50mm in 1mm steps
• Inch version: 0.1 – 2.0" in 0.1" steps
Note
❒
Default:
• Metric version:
10mm
• Inch version:
0.4"
03. Left Dup. Margin You can specify left margin on the back side of copies.
• Metric version: 0 – 50mm in 1mm steps
• Inch version: 0 – 2.0" in 0.1" steps
Limitation
❒
The optional duplex unit is required.
Note
❒
Default:
• Metric version:
5mm
• Inch version:
0.2"
04. Top Dup. Margin You can specify back top margin on the front side of copies.
• Metric version: 0 – 50mm in 1mm steps
• Inch version: 0 – 2.0" in 0.1" steps
Limitation
❒
The optional duplex unit is required.
Note
❒
Default:
• Metric version:
5mm
• Inch version: 0.2"
To Next Page
Loading...
