User Tools (Copy Features)
124
4
3. Input/Output
1
/
2
Menu Description
1. Duplex Auto Eject When making two-sided copies from one-sided originals, if
the last original is an odd page, the last copy will be automat-
ically delivered with the reverse side blank. You can cancel
this setting.
⇒
P.64
“Duplex—Making Two-Sided Copies”
Limitation
❒
The optional duplex unit is required.
Note
❒
When you set one original at a time in the document
feeder or set an original on the exposure glass, this func-
tion does not come effect.
❒
Default:
On
2. Comb. Auto Eject As a default setting, if the number of originals in the option-
al document feeder is less than the number required in the
selected Combine mode, the missing image are copied
blank. You can cancel this setting.
⇒
P.58
“Combine—Com-
bining Originals into One Copy”
Limitation
❒
When you set one original at a time in the document
feeder or set an original on the exposure glass, this func-
tion does not come into effect.
Note
❒
Default:
On
3. Original Count As a default setting, the display shows the copy quantity
you specified and the number of copies made. You can can-
cel this setting, and instead view the number of originals to
be fed in the document feeder and the number of copies
made.
Note
❒
Default:
Off
4. SADF Auto Reset When you set one original at a time in the optional docu-
ment feeder, the Auto Feed indicator lights for a selected
time after an original is fed to show that the document feed-
er is ready for another original. You can adjust this time
from 3 seconds to 99 seconds in 1 second steps.
Limitation
❒
The optional document feeder (ADF) is required.
Note
❒
Default:
4 seconds
To Next Page
Loading...
