G144
Ricoh Europe B.V.
Technical Training Centre
w
w
w
.
g
e
t
-
u
-
w
i
c
e
.
c
o
m
49
Slide 49
Fusing Unit Errors 1
Open heat error
Temperature stays lower than 68°C for more than
28 seconds during warm-up
Low heat error
Standby:
» Temperature stays lower than 80°C for more than 10
seconds.
Printing:
» Temperature stays lower than 145°C for more than 4
seconds for up to two consecutive print jobs.
Temperature stays 25°C lower than the fixed
fusing temperature for more than 4 seconds for
up to two consecutive print jobs.
Temperature stays higher than 220°C for more
than 3 seconds.
5. Engine
No additional notes
To Next Page
Loading...
