Ricoh Aficio BP20 - Command Prompt

G144
Ricoh Europe B.V.
Technical Training Centre
w
w
w
.
g
e
t
-
u
-
w
i
c
e
.
c
o
m
87
Slide 87
Command Prompt
 You can only use one of the following operating
systems for this type of upgrade:
 Windows NT
 Windows 2000
 Windows XP
 Connect the machine to a PC with a parallel cable
 Open a command prompt and enter:
 Copy /b Filename lpt1
 The firmware will automatically be upgraded
8. Troubleshooting
No additional notes