folded paper is held up to light. When the difference is one calibration mark in the "+" direction, the optimal adjustment value for the
[Printing direction:] is "+1.0".
● Fold the test pattern sheet in half widthwise, and then check the adjustment value for the [Paper feed direction:].
● Adjustment values are in 0.1 increments.
In the [Printing direction:] and [Paper feed direction:] boxes, enter the adjustment values (-4.0 to +4.0)
from step
.
Click [Finish].
● If a test pattern does not print or the image is not clear, select the [Print a test pattern and return to this screen] check box, and then click
[Next >]. A registration test pattern is printed and the dialog box displayed in step
.
● Opening from the Start Menu
● Opening from an Application
Top Previous Next
Copyright © 2005 All rights reserved.
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/int/m0003.htm (2 of 2)2005/10/05 12:04:21
To Next Page
Loading...
