Printing > Adjusting Print Quality > Printing with Print Quality Settings You Want > Adjusting Brightness, Contrast, and Saturation
Adjusting Brightness, Contrast, and Saturation
Follow the procedure below to adjust brightness, contrast, and saturation for printing.
Open the file you want to print from the application, and then open the printer properties dialog box.
On the [Setup] tab, click [User settings] in the [Print Quality] area.
Click [Change...].
The [Change User Settings] dialog box appears.
Click the [Balance Adjustments] tab.
Adjust the brightness, contrast, and saturation.
● Make adjustments by moving the slider or clicking [-] or [+].
Click [OK].
The [Change User Settings] dialog box closes.
Make the necessary settings, and then click [OK].
The printer properties dialog box closes.
Make print settings, and then click [OK].
● Opening from an Application
● For details about [Brightness:], [Contrast:], and [Saturation:], see the printer driver Help.
Top Previous Next
Copyright © 2005 All rights reserved.
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/int/0028.htm2005/10/05 12:03:15
To Next Page
Loading...
