Troubleshooting > Printer Status Monitor Errors > No Paper/Tray Not Detected (Tray 2)
No Paper/Tray Not Detected (Tray 2)
No paper is loaded in tray 2 (optional) or paper is not loaded properly. Follow the procedure below to load paper
properly.
Hold the grip on tray 2 (optional), lift the tray slightly, and then pull it out.
● Pull tray 2 (optional) completely out. Take care not to drop it.
Lift off the cover.
Load paper print side down, and then adjust the paper guide to the paper size.
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/int/t0011.htm (1 of 3)2005/10/05 12:05:12
To Next Page
Loading...
