Printer Driver > Maintaining the Printer Using Utilities > Adjust Paper Feed
Adjust Paper Feed
If horizontal lines are printed unaligned or print images are patchy, print a test pattern, and then adjust the paper feed
setting.
● To check the printed test pattern, proceed to step 7..
1. Open the printer properties dialog box.
2. Click the [Maintenance] tab.
3. Click [Adjust Paper Feed].
4. Click [Next >].
5. Check that A4/Letter size paper is loaded in the paper tray.
6. Click [Next >].
A test pattern to adjust paper feed is printed.
❍ Do not perform other operations during printing.
7. Check the optimal adjustment values on the printed test pattern.
❍ The optimal adjustment value is the number that appears on the left of the lightest gray square with straight horizontal lines on both
sides. When this number is "+2", the optimal adjustment value is "+2".
❍ When horizontal lines beside the lightest gray square are broken, select the optimal adjustment value by referring to the lines broken
in the opposite direction. When the "+2" square is the lightest gray square and the "+6" horizontal lines are broken in the opposite
direction, the optimal adjustment value is between "+3" and "+5". After adjustment, check the adjustment result.
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/acc/m0004.htm (1 of 2)2005/10/05 12:07:47
To Next Page
Loading...
