Printing starts when you push in the paper.
Printing cannot start until the machine finishes cleaning its head. Load the paper in the bypass tray when
cleaning finishes.
❍ When using the bypass tray, make sure the envelope or sheet of paper is between the top and bottom of the bypass tray guides.
❍ Paper can only be inserted one sheet at a time.
❍ Support the sheet with your hands to keep it from sliding out and dropping.
❍ Insert the sheet straight into the bypass tray.
● Opening from an Application
● Canceling Printing
Top Previous Next
Copyright © 2005 All rights reserved.
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/acc/t0012.htm (2 of 2)2005/10/05 12:08:36
To Next Page
Loading...
