❍ Pull tray 1 completely out. Take care not to drop it.
6. Remove loaded paper.
7. Squeeze the paper guides on both sides, and then adjust them according to the paper size.
❍ The front end paper guide may also need to be adjusted.
8. Load paper with the print side face down but not over the limit mark.
9. Squeeze the front end paper guide, and then slide it to meet the edge of the paper.
file:///E|/shared/pdf-work/newfiles/pp2w/Op_Guide/acc/t0013.htm (2 of 4)2005/10/05 12:08:37
To Next Page
Loading...
