8. Press [Details].
9. Select [Auth. Info] using [ ] or [ ], and then press the [OK] key.
10. Select [User Code] using [ ] or [ ], and then press the [OK] key.
11. Enter the user code using the number keys, and then press the [OK] key.
If you have entered a wrong code, press the [Clear/Stop] key and then enter the correct code again.
You can use up to eight digits for specifying the user code.
12. Select [Function Permissions] using [ ] or [ ], and then press the [OK] key.
13. Select the function you want to set the user code for using [ ], and then press the [OK] key.
Authentication Information
237
To Next Page
Loading...
Need help?
General
