14. Press the [Escape] key.
15. Press [End].
16. Press the [OK] key.
17. Press the [User Tools/Counter] key.
• You can enter a one-to eight-digit user code.
• To register the name, see "Registering Names".
• p.230 "Registering Names"
Changing a User Code
This section describes how to change a user code.
• Even if you change a user code, the counter value will not be cleared.
1. Press the [User Tools/Counter] key.
2. Select [System Settings] using [ ] or [ ], and then press the [OK] key.
5. Registering Addresses and Users for Facsimile/Scanner Functions
238
To Next Page
Loading...
Need help?
General
