9. Select [Fax Settings] using [ ] or [ ], and then press the [OK] key.
10. Enter again the item to be changed.
11. Press [End].
12. Press the [OK] key.
13. Press the [User Tools/Counter] key.
• To change the name, key display and title, see "Registering Names".
• p.230 "Registering Names"
To change the protocol and IP-Fax destination
This section describes how to select the protocol.
1. Press [IP].
2. Select the protocol using [ ] or [ ], and then press the [OK] key.
5. Registering Addresses and Users for Facsimile/Scanner Functions
268
To Next Page
Loading...
