Ricoh Aficio MP 201F User Manual

The default setting is [TCP/IP Priority].
If you select [IPX Only] or [TCP/IP Only], you cannot switch the protocol even if you cannot connect
with it. If "NetWare" in “Effective Protocol” is set to [Inactive], you can only use TCP/IP.
NW Frame Type
Select the frame type when you use NetWare.
The default setting is [Auto Select].
SMB Computer Name
Specify the SMB computer name.
Enter the computer name using up to 15 characters.
"*+,/:;<>=?[\]|. and spaces cannot be entered.
Do not set a computer name starting with RNP and rnp.
Use uppercase letters for alphabets.
SMB Work Group
Specify the SMB work group.
Enter the computer name using up to 15 characters.
"*+,/:;<>=?[\]|. and spaces cannot be entered.
Use uppercase letters for alphabet.
Ethernet Speed
Set the access speed for networks.
The default setting is [Auto Select].
Select a speed that matches your network environment. [Auto Select] should usually be selected.
10Mbps Half
Duplex
10Mbps Full
Duplex
100Mbps
Half Duplex
100Mbps Full
Duplex
Auto Select
10Mbps Half
Duplex
10Mbps Full
Duplex
100Mbps
Half Duplex
100Mbps Full
Duplex
Auto Select
1. System Settings
30
1

Ricoh Aficio MP 201F Specifications

General

Brand	Ricoh
Model	Aficio MP 201F
Category	All in One Printer
Language	English