SMTP
SMTP-C
POP3
SMB
NCP
WSD (Scanner)
Management Function TCP/IP (IPv4/IPv6)
RSH
RCP
FTP
FTP-C
SNMP
SNMP-C
HTTP
HTTPS
TELNET (mshell)
NBT
DHCP
DNS
DNS-C
LDAP
To use IPP and SMB, use the SmartDeviceMonitor for Client port.
To use IPP under Windows XP/Vista, Windows Server 2003/2003 R2/2008, use the Standard IPP port.
To use IPP under Windows 2000, use SmartDeviceMonitor for Client.
AppleTalk can be used when the PostScript 3 module is installed.
Under Windows Vista, or Windows Server 2008, WSD (Printer), WSD (Scanner), uses the WSD Port.
Only the rsh/rcp commands in Unix OS standard command set are supported.
Specifications
379
To Next Page
Loading...
Need help?
General
