Page 76 of 81
Copyright (c) 2010 RICOH COMPANY, LTD. All Rights Reserved.
7.1.9 SF.GENUINE MFP Control Software Verification Function
At every TOE start-up, the MFP Control Software Verification Function verifies the integrity of the MFP
Control Software that is installed in the FlashROM.
The TOE verifies the integrity of the executable code of the MFP Control Software each time the TOE starts
up. The TOE becomes available for users only if the integrity of the control software can be verified. If
integrity cannot be verified, it indicates that the MFP Control Software is not correct.
By the above, FPT_TST.1 (TSF testing) is satisfied.
To Next Page
Loading...
