Page 35 of 82
Copyright (c) 2010 RICOH COMPANY, LTD. All Rights Reserved.
6 Security Requirements
This section describes the security functional requirements, security assurance requirements, and security
requirements rationale.
6.1 Security Functional Requirements
This section describes the TOE security functional requirements for fulfilling the security objectives
defined in "4.1 Security Objectives for TOE". The security functional requirements are quoted from the
requirement defined in the CC Part2.
The part with assignment and selection defined in the CC Part2 are identified with [bold face and
brackets].
6.1.1 Class FAU: Security audit
FAU_GEN.1 Audit data generation
Hierarchical to: No other components.
Dependencies: FPT_STM.1 Reliable time stamps.
FAU_GEN.1.1 The TSF shall be able to generate an audit record of the following auditable events:
a) Start-up and shutdown of the Audit Functions;
b) All auditable events for the [selection: not specified] level of audit; and
c) [assignment: auditable events of the TOE shown in Table 5].
Table 5 shows the actions (CC rules) recommended by the CC as auditable for each functional
requirement and the corresponding auditable evens of the TOE.
Table 5: List of auditable events
Functional requirements Actions which should be auditable Auditable events of TOE
FAU_GEN.1 None -
FAU_SAR.1
a) Basic: Reading of information from
the audit records.
Auditable events not recorded.
FAU_SAR.2
a) Basic: Unsuccessful attempts to
read information from the audit
records.
Auditable events not recorded.
FAU_STG.1 None -
FAU_STG.4
a) Basic: Actions taken due to the
audit storage failure.
Auditable events not recorded.
To Next Page
Loading...
Need help?
General
