Why are original images printed on the reverse side of the paper by my Ricoh Copier?
If original images are printed on the reverse side of the paper by your Ricoh Copier, you may have loaded the paper incorrectly. Load paper into the paper tray or tray 3 (LCT) with the print side up. Load paper into the Large capacity tray (LCT), or bypass tray with the print side down.
Why does my Ricoh All in One Printer misfeed frequently?
If misfeeds occur frequently with your Ricoh All in One Printer, ensure the tray's side or end fences are set properly and locked. Also, do not place anything on the finisher tray. If you load a paper size that is not selected automatically, specify the paper size using the control panel. If misfeeds occur frequently when printing on sheets loaded in internal tray 2, raise the guide on internal tray 2, and then try printing the job again. If sheets are curled when they are output, raise the guide on internal tray 2.
Why does Ricoh All in One Printer print on the reverse side?
If your Ricoh All in One Printer prints original images on the reverse side of the paper, you might have loaded the paper incorrectly. Load paper into the paper tray or tray 3 (LCT) with the print side up. Load paper into the Large capacity tray (LCT), or bypass tray with the print side down.
How to enable duplex printing on Ricoh All in One Printer?
If you cannot print in duplex mode with your Ricoh All in One Printer, it might be because you've selected a paper tray that isn't set for duplex printing. Change the setting for "Apply Duplex" in System Settings to enable duplex printing for the paper tray. Alternatively, you might have selected a paper type that cannot be used for duplex printing. In [Tray Paper Settings], select a paper type suitable for duplex printing.
What to do if error message remains on Ricoh All in One Printer?
To clear an error message on your Ricoh All in One Printer after removing misfed paper, open and close the cover as required. Also, check if paper is still jammed in the tray.
Why is my Ricoh Copier unable to connect to the network?
If your Ricoh Copier is unable to connect to the network, a network error may have occurred. Press [Check] in the function where the error occurred and then check the displayed message, and take appropriate action. Check that the machine is correctly connected to the network, and that the machine is correctly set.
What to do if my Ricoh Copier lamp remains lit even when the [Energy Saver] key was pressed?
If the lamp remains lit on your Ricoh Copier and the machine does not enter Sleep mode even though the [Energy Saver] key was pressed, it may be because the ADF is open. Close the ADF. Also, check if the machine is communicating with external equipment and wait a little longer.
What does it mean if an error has occurred on my Ricoh Copier?
If an error has occurred on your Ricoh Copier, a function with the status "Error Occurred" in the [Check Status] screen is defective. Press [Check] in the function where the error occurred, then check the displayed message, and take appropriate action.
How to fix Ricoh Copier hardware problem Ethernet?
If your Ricoh Copier displays the message "Hardware Problem: Ethernet", it means that an error has occurred in the Ethernet interface. Turn off the main power switch, and then back on again.
What to do if my Ricoh Copier shows 'Memory is full. Do you want to store scanned file?'?
If your Ricoh Copier shows 'Memory is full. Do you want to store scanned file?', it means the scanned originals exceed the number of sheets/pages that can be stored on the hard disk. Press [Yes] to store pages that have been scanned or press [No] if you are not storing pages that have been scanned. Delete unnecessary files by pressing [Delete File].
General| Functions | Print, Copy, Scan, Fax |
|---|---|
| Print Technology | Laser |
| Print Speed (Black) | 45 ppm |
| Print Speed (Color) | 45 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Copy Speed | 45 cpm |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Monthly Duty Cycle | 150, 000 pages |
| Fax Resolution | 200 x 200 dpi |
| Duplex Printing | Yes |
| Paper Capacity | Maximum: 4, 400 sheets |
| Paper Size | A3, A4, A5, B4, B5, Legal, Letter |
| Connectivity | USB, Ethernet, Wi-Fi |
| Scanner Type | Flatbed, ADF |
| Operating System Compatibility | Windows, macOS, Linux |
To Next Page
