Unauthorized Copy Control
81
3
❖ Printing a document using [Data security for copying]
1. The pattern and text you have set
is printed.
2. The document is copied or stored
in copiers / multifunction machines
which the optional Copy Data Secu-
rity unit is installed.
3. The document is blanked by gray
overprint.
Note
❒ When printing a document that is set with [Data security for copying], the ma-
chine does not require the optional Copy Data Security unit to be installed.
The Copy Data Security unit is required when copying or storing a document
protected by gray overprint.
❒ Only the RPCS printer driver is supported.
❒ Printing at 200 × 200 dpi is not possible.
❒ You cannot partially embed a pattern and text in a document.
❒ To make the embedded pattern clear, set the character size at least 50 pt (pref-
erably 70 to 80 pt) and character angle to between 30 and 40 degrees.
❒ Use 182 × 257 mm (7
1
/
4
× 10
1
/
2
in.) or larger paper.
❒ Use ordinary or recycled paper of at least 70% whiteness.
❒ Duplex printing may interfere with this function as a result of text and pat-
terns being visible through the paper.
Reference
For details about setting [Data security for copying], see the printer driver Help.
AJL030S
To Next Page
Loading...
Need help?
General
