General Features
39
2
❖ Fold Width Fine Adjustment
Adjusts the fan fold width.
"Adjustment Value (Fan Folding Finisher)" adjusts the Fan Fold width
(shown as A, B, and C in the figure below).
This menu appears only when the folding finisher is installed.
The default setting is 0.0 mm (Metric version) / 0.00 inch (Inch version).
Enter a value in 0.5 mm units in the ranging from -6.0 mm (-0.24 inch) to 6.0
mm (0.24 inch).
ATM008S
To Next Page
Loading...
