Message Cause Solution
"The destination list has been
updated. Specified
destination(s) or sender's
name has been cleared."
A specified destination or
sender's name was cleared
when the destination list in the
delivery server was updated.
Specify the destination or sender's name
again.
"The entered path is not
correct. Please re-enter."
The entered path format is
incorrect.
Confirm the destination computer and
the path, and then enter it again.
"The selected file(s)
contained file(s) without
access privileges. Only file(s)
with access privileges will be
deleted."
You have tried to delete files
without the authority to do so.
The files can be deleted by the file
administrator. To delete a file which you
are not authorized to delete, contact the
administrator.
"The specified group contains
some destination(s) that do
not have access privileges.
Do you want to select only the
privileged destination(s)?"
The specified group contains
some destinations for sending
by e-mail and some
destinations for sending by
Scan to Folder.
To select destinations for sending by
email, press [Select] for the message
displayed on the e-mail screen. To select
destination for sending by Scan to
Folder, press [Select] for the message
displayed on the Scan to Folder screen.
"Transmission has failed.
Insufficient memory in the
destination hard disk. To
check the current status, press
[Scanned Files Status]."
Transmission has failed.
There was not enough free
space on the hard disk of the
SMTP server, FTP server, or
client computer at the
destination.
Allocate sufficient space.
"Transmission has failed. To
check the current status, press
[Scanned Files Status]."
While a file was being sent, a
network error occurred and
the file could not be sent
correctly.
Try the operation once more. If the
message is still shown, the network may
be crowded. Contact the network
administrator. If multiple files were sent,
use the Scanned Files Status screen to
check for which file the problem
occurred.
"Updating the destination list
has failed. Try again?"
A network error has occurred. Check whether the server is connected.
"Updating the destination
list... Please wait. Specified
destination(s) or sender's
name has been cleared."
The destination list is being
updated.
If a destination or sender's name was
already selected, re-select it after this
message disappears.
Messages Displayed When Using the Scanner Function
73
To Next Page
Loading...
