• When you use the printer function, set the [Paper Volume] again after loading the paper roll. See
“Tray Paper Settings”, General Settings Guide.
Loading Cut Paper
The following procedure explains loading cut paper.
When using translucent paper
Load the translucent paper into Tray 4.
Make sure to set the side guides before loading paper. After loading paper into the tray, make sure the
paper is placed straightly and the side guides are set securely onto it.
• Fan the paper before loading.
• Straighten curled or warped paper before loading.
Loading Paper
79
To Next Page
Loading...
Need help?
General
