Ricoh Aficio SP 1200SF - User Manual

36 pages

To Next Page

STEP 1

STEP 2

Setup is Complete!

Quick Setup Guide

Installing the Driver & Software

Setting Up the Machine

SP 1200SF

Before you can use the machine, you must set up the hardware and install the driver. Please read

this ‘Quick Setup Guide’ for proper set up and installation instructions.

Keep this ‘Quick Setup Guide’ and the supplied CD-ROM in a convenient place for quick and easy

reference at all times.

Main Page

Other manuals for Ricoh Aficio SP 1200SF

Specifications4 pages

Questions and Answers:

A
Alfred OlsonSep 2, 2025
How to fix black toner marks across the page on Ricoh Aficio SP 1200SF All in One Printer?
- Q
  qdanielsSep 2, 2025
  To resolve black toner marks across the page from your Ricoh All in One Printer, ensure that you use paper that meets the specifications. If you use label sheets for laser machines, the glue from the sheets may sometimes stick to the OPC drum surface; clean the drum unit.
L
Lisa Cline DDSSep 1, 2025
How to fix faint printouts on Ricoh Aficio SP 1200SF All in One Printer?
- D
  doylemoniqueSep 1, 2025
  Faint printouts from your Ricoh All in One Printer can be caused by environmental conditions like humidity or high temperatures. Check the machine’s environment.
M
Matthew RussellAug 31, 2025
How to fix toner specks on Ricoh All in One Printer printouts?
- S
  Sheri MooreAug 31, 2025
  To address toner specks on printouts from your Ricoh All in One Printer, make sure you're using paper that meets the specifications. Clean the corona wire and the drum unit.
E
Elizabeth RodriguezAug 30, 2025
Why Ricoh Aficio SP 1200SF copies have a vertical black line?
- R
  richard56Aug 30, 2025
  Black vertical lines on copies from your Ricoh All in One Printer are typically caused by dirt or correction fluid on the glass strip, or the corona wire for printing is dirty. Clean the scanner glass to resolve this.
R
Ricardo ShermanAug 29, 2025
How to solve poor sending quality on Ricoh Aficio SP 1200SF All in One Printer?
- E
  ebaileyAug 29, 2025
  To address poor sending quality on your Ricoh All in One Printer, try changing your resolution to Fine or S.Fine. Make a copy to check your machine’s scanner operation. If the copy quality isn't good, clean the scanner.
A
Amanda ReyesAug 28, 2025
Why Ricoh Aficio SP 1200SF prints condensed with horizontal streaks?
- T
  Tom CarterAug 28, 2025
  Condensed print, horizontal streaks, cut-off sentences, or missing lines on your Ricoh All in One Printer are usually caused by a poor telephone connection. Ask the other party to resend the fax.
D
Dorothy PachecoAug 27, 2025
Why Ricoh All in One Printer printed pages are smeared?
- M
  Melissa PrattAug 27, 2025
  Smeared printouts from your Ricoh All in One Printer could be due to an incorrect Paper Type setting or using print media that is too thick or has a rough surface.
C
Charlotte MillerAug 26, 2025
How to fix light printouts on Ricoh All in One Printer?
- R
  Renee MontoyaAug 27, 2025
  If printouts from your Ricoh All in One Printer are too light, and this occurs when making copies or printing received faxes, turn off Toner Save mode in the machine menu settings. You can also disable Toner Save mode in the Advanced tab of the printer driver.
T
Timothy HarrisAug 25, 2025
What to do if Ricoh Aficio SP 1200SF does not load paper?
- R
  Rebecca OlsenAug 26, 2025
  If your Ricoh All in One Printer isn't loading paper and displays 'No Paper' or a 'Paper Jam' message, first, load a new stack of paper if the tray is empty. If there's paper, ensure it's straight. Try removing the paper, turning the stack over, and placing it back. Reduce the amount of paper in the tray.
H
hernandezjillianAug 25, 2025
Why Ricoh All in One Printer has no printout?
- W
  wilsontammyAug 25, 2025
  If your Ricoh All in One Printer isn't printing, verify that it is plugged in and turned on. Also, check if the toner cartridge and drum unit are correctly installed. Ensure the interface cable is properly connected to both the printer and your computer. Confirm that the correct printer driver is installed and selected. Check the LCD for any error messages and ensure the printer is online.