Using the Fax Function
20
Place the original face down on the exposure glass or face up
inthe ADF.
Lift the ADF carefully without holding the input tray. Otherwise, the ADF
might be damaged.
Exposure Glass ADF
BSP086S
BSP412S
• If necessary, configure the advanced scan settings. For details, see "Advanced Scan Settings"
on page 22.
Enter the fax number (up to 40 characters) using the number
keys.
Press the [Start] key.
Depending on the machine’s settings, you
will be prompted to place another original
on the exposure glass. In this case, proceed
to the next step.
BSP089S
Initial Screen and Basic Operation for Sending a Fax
To Next Page
Loading...
