22
Using the Fax Function
v Adjusting Image Density
You can adjust the image density for the current job.
1. Press the [Density] key.
2. Press the [Density] or [ ][ ] keys to select the desired density level, and then press the
[OK] key.
Normal Dark Light
v Specifying Resolution
You can specify the scan resolution for the current job.
1. Press the [Image Quality] key.
2. Press the [Image Quality] or [ ][ ] keys to select the desired resolution setting, and then
press the [OK] key.
Fine Photo
Standard
for originals with
small print
for originals with
images
for originals with
normal-sized characters
• For more details about the fax function, see "Using the Fax Function", User Guide.
• If you would like to change the default settings of the machine, see "Configuring the Machine
Using the Control Panel", User Guide.
Advanced Scan Settings
To Next Page
Loading...
