Troubleshooting
28
v Images are too dark or too light on the copied pages or
scanned files
Image density is too dark or too light. Adjust the image density.
v Toner smears on the printed surface
Toner on the printed surface is not dry. Do not touch printed surfaces immediately after paper is
output. Remove freshly output paper one by one, taking care not to touch printed areas.
v Copied pages or scanned files are dirty
Toner or correction fluid on the original is not dry. Before placing originals on the exposure
glass, make sure that toner or correction fluid is dry.
v The same area is dirty whenever making copies or
scanning files
The exposure glass or ADF is dirty. Clean the exposure glass or ADF. Clean the parts indicated
with arrows with a soft damp cloth and then wipe the same parts with a dry cloth to remove any
remaining moisture. For more details, see "Cleaning", User Guide.
Exposure Glass ADF
BSP079S
BSP080S
Printing or Scanning Problems
To Next Page
Loading...
