27
Message
(alphabetical order)
Causes Solutions
Upper Misfeed Jam
Paper has been
jammed during
printing.
Remove the jammed paper. See
"Removing Inner/Lower/Upper Jam"
on page 30.
USB Flash Disconnect
Press Clear Key
The Scan to USB
function failed
because the USB
flash disk was
removed before the
operation could be
completed.
Check that the USB flash disk is
securely inserted in the machine. Do
not pull out the USB flash disk until
"Ready" appears on the display.
USB Flash Disk Full
Press Clear Key
The Scan to USB
function failed
because there
was not enough
memory on the
USB flash disk.
Use a USB flash disk with enough
memory.
Write Protect
Press Clear Key
The Scan to USB
function failed
because the
machine could not
access the USB
flash disk properly.
Use a USB flash disk that is not
password- or write-protected.
To Next Page
Loading...
