• You can search Scan to E-mail destinations from the LDAP server (not Scan to FTP or Scan to Folder
destinations).
1. Press the [Scanner] key.
3. Press the [ ][ ] keys to select [Search LDAP], and then press the [OK] key.
4. Press the [ ][ ] keys to select [Start LDAP Search], and then press the [OK] key.
A list of destinations that match the search conditions appears on the display (up to 50).
5. Press the [ ][ ] keys to scroll through the search result, and then press [ ] to select the
desired destination.
You can select multiple destinations. A check mark will appear for the selected destinations. To
deselect a destination, press [
] again.
• The search result will contain destinations that match the predefined search conditions.
• To send scanned files to the destinations specified from the LDAP server, you must select the file
format after pressing the [Start] key to execute scanning. The file format depends on the [Scanning
Mode] setting under scanner settings:
• When in black-and-white scanning mode: TIFF or PDF
• When in color or gray scale scanning mode: JPEG or PDF
Scanning Using the Control Panel
187
To Next Page
Loading...
