Ricoh Aficio SP 3510SF - Configuring the Energy Saver Mode Settings

Item Description
Date Format Select the date format from [MM/DD/YYYY], [DD/MM/YYYY], or
[YYYY/MM/DD].
Set Time
Item Description
Time Format Select 24- or 12-hour time format.
Time (AM/PM) Select [AM] or [PM] if 12-hour time format is selected.
hour (0-23) Enter the current hour if 24-hour time format is selected (0-23).
hour (1-12) Enter the current hour if 12-hour time format is selected (1-12).
min. (0-59) Enter the current minute (0-59).
Configuring the Energy Saver Mode Settings
Click the [Energy Saver Mode] tab on the administrator settings page to set the machine to enter Energy
Saver mode, Energy Saver mode 1 or Energy Saver mode 2, to reduce power consumption.
Energy Saver Mode
Item Description
Energy Saver Mode 1 Select [Active] to set the machine to enter Energy Saver mode 1 if the
machine has been idle for about 30 seconds.
It takes less time to recover from Energy Saver mode 1 than from power-off
state or Energy Saver mode 2, but power consumption is higher in Energy
Saver mode 1 than in Energy Saver mode 2.
8. Configuring the Machine Using Web Image Monitor
358