Clears the fax Quick Dial/Speed Dial destinations and Special Sender list.
Press [Yes] to execute. Press [No] to exit to the previous level of the menu tree without clearing
the destinations.
Shortcut to Function
Assigns one of the following functions to the [Shortcut to Func.] key on the control panel.
Default: [ID Card Copy Mode]
• ID Card Copy Mode
• Fax Auto Print Setting
• Fax Immediate TX
• Select Scanner Dest.
• Dup/Comb Copy
Admin. Tools Lock
Specifies a four-digit password for accessing the [Address Book], [Network Settings], and [Admin.
Tools] menus.
Do not forget this password.
• On (0000 to 9999)
• Off
IPsec
Selects whether to enable or disable IPsec.
This function appears only when a password is specified under [Admin. Tools Lock].
Default: [Inactive]
• Active
• Inactive
Fax Number Confirmation
Sets the machine to require a fax number to be entered twice when specifying a destination
manually.
When this function is enabled, you cannot use the On Hook Dial function.
This function appears only when a password is specified under [Admin. Tools Lock].
Default: [Off]
• On
• Off
Save Scn Data to USB
Selects whether to enable or disable the Scan to USB function.
7. Configuring the Machine Using the Control Panel
302
To Next Page
Loading...
