Ricoh C6055 User Manual

The key does not appear on the search screen unless both "Attribute" and "Key Display" are registered.
Make sure you register both to use the optional search.
33. Press [OK].
34. Press [Exit].
35. Press the [User Tools/Counter] key.
• p.313 "Registering SMTP and LDAP Authentication"
Changing the LDAP server
This section describes how to change the programmed LDAP server.
1. Press [System Settings].
2. Press [Administrator Tools].
3. Press [ Next] twice.
4. Press [Program / Change / Delete LDAP Server].
5. Check that [Program / Change] is selected.
6. Select the LDAP server you want to change.
7. Change the settings as necessary.
8. Press [OK] after changing each item.
9. Press [Exit].
10. Press the [User Tools/Counter] key.
Deleting the LDAP server
This section describes how to delete the programmed LDAP server.
1. Press [System Settings].
Programming the LDAP server
101
2

Ricoh C6055 Specifications

General

Brand	Ricoh
Model	C6055
Category	All in One Printer
Language	English