What to do if error message remains after removing misfed paper from Ricoh All in One Printer?
If your Ricoh All in One Printer displays an error message even after removing the misfed paper, fully open the front cover and then close it. Paper may still be jammed in the tray.
What to do if error message remains displayed even if the indicated cover is closed on Ricoh MP C6003?
If the Ricoh All in One Printer displays an error message even after closing the indicated cover, it means that one or more covers that are not indicated are still open. Close all the covers of the machine.
How to prevent frequent misfeeds in Ricoh MP C6003 All in One Printer?
If misfeeds occur frequently with your Ricoh All in One Printer, it may be due to using curled paper. Take the stiffness out of the paper with your hands to straighten out the curl, and load the paper upside down so that the curled edges face downward. Also, the tray's side or end fences may not be set properly. Check that the side or end fences are set properly.
Why does my Ricoh MP C6003 misfeed frequently?
If misfeeds occur frequently with your Ricoh All in One Printer, it may be because paper of undetectable size has been loaded. If you load a paper size that is not selected automatically, you need to specify the paper size with the control panel.
What to do if an error has occurred on Ricoh MP C6003 All in One Printer?
If you encounter an error on your Ricoh All in One Printer, and the [Check Status] screen shows a function with the status "Error Occurred", press [Check] in the function where the error occurred. Then check the displayed message and take appropriate action.
What to do if Ricoh All in One Printer does not enter sleep mode?
If the Ricoh All in One Printer indicator lamp remains lit, and the machine does not enter Sleep mode even when the Energy Saver key is pressed, it could be because the ADF is open. Close the ADF. Also, check if the machine is communicating with external equipment. Wait a little longer.
Why Ricoh All in One Printer cannot print in duplex mode?
If your Ricoh All in One Printer cannot print in duplex mode, it might be because you have selected a paper type that cannot be used for duplex printing. In the System Settings, select a paper type that can be used for duplex printing.
Why does my Ricoh All in One Printer power off automatically?
If the power on your Ricoh All in One Printer turns off automatically, the Weekly Timer setting may be set to [Main Power Off]. Change the Weekly Timer setting.
Why the Address Book cannot be changed from the display panel on Ricoh All in One Printer?
If the Address Book on your Ricoh All in One Printer cannot be changed from the display panel, it may be because the Address Book is being backed up from Web Image Monitor or other tools running on the computer. Wait until the Address Book backup is complete, and then try to change the Address Book again.
Why only copier icon appears on Ricoh MP C6003?
If the only icon that appears on the home screen of your Ricoh All in One Printer when turned on is the [Copier] icon, it indicates that functions other than the copier function are not yet ready. Wait a little longer.
General| Print Technology | Laser |
|---|---|
| Print Speed (Black) | 60 ppm |
| Print Speed (Color) | 60 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Paper Capacity (Standard) | 1, 200 sheets |
| Paper Size | Up to 12" x 18" |
| Monthly Duty Cycle | 300, 000 pages |
| Functions | Print, Copy, Scan, Fax |
| Duplex Printing | Yes |
| Memory (Standard) | 2 GB RAM |
| Operating System Compatibility | Windows, Mac OS, Linux |
| Connectivity | Ethernet |
| Scan Resolution | 600 dpi |
| Original Capacity | 100 sheets |
| Display | 9-inch Smart Operation Panel |
To Next Page
