What to do if Ricoh All in One Printer cannot detect original size?
If your Ricoh All in One Printer cannot detect the original size, place the original correctly or specify the scan size, and then place the originals again.
What to do if Ricoh MP C6004 shows an error?
If your Ricoh All in One Printer displays an error, it indicates that a function in the [Check Status] screen has a defect. To resolve this, press [Check] for the function with the error, read the displayed message, and take the recommended action. You can continue using other functions normally.
Why does my Ricoh All in One Printer frequently misfeed?
If your Ricoh All in One Printer frequently misfeeds, and you're using curled paper, straighten the paper or load it upside down so the curled edges face downward. Ensure the cut paper is stored flat to prevent curling.
How to fix frequent misfeeds on Ricoh MP C6004 All in One Printer?
If your Ricoh All in One Printer frequently misfeeds, it may be due to improperly set tray side or end fences. Remove the misfed paper and check that the side and end fences are correctly set and locked.
What causes frequent misfeeds in Ricoh All in One Printer?
If your Ricoh All in One Printer frequently misfeeds, it may be because paper of undetectable size has been loaded. Remove the misfed paper. If the paper size isn't automatically selected, specify the paper size using the control panel.
Why Address Book change causes error on Ricoh MP C6004 All in One Printer?
If an error occurs when the Address Book is changed from the display panel or Web Image Monitor on your Ricoh All in One Printer, it is because the Address Book cannot be changed while you delete the multiple stored documents. Wait a while, and then retry the operation.
What to do if Ricoh All in One Printer does not turn off?
If your Ricoh All in One Printer does not turn off 7 minutes after the main power is turned off, the machine cannot perform the shutdown procedure. Repeat the shutdown procedure. If the machine still does not turn off, contact your service representative.
Why does Ricoh MP C6004 print on the reverse side?
If images are printed on the reverse side of the paper by your Ricoh All in One Printer, you may have loaded the paper incorrectly. Load the paper correctly.
How to enable duplex printing on Ricoh MP C6004?
If your Ricoh All in One Printer does not print in duplex mode, it may be because the selected paper type is unsuitable for duplex printing. In "Tray Paper Settings", choose a paper type that supports duplex printing.
How to turn on display on Ricoh MP C6004 All in One Printer?
If your Ricoh All in One Printer display is turned off, it is likely in Sleep mode. Touch the display panel to wake it.
Methods to protect documents from unauthorized access and control machine settings.
Explains the fundamental steps for sending documents using memory transmission.
Steps to scan documents and send them to a shared folder on a computer.
How to scan documents and send them as email attachments.
Procedure for saving scanned documents onto the machine's hard disk for later retrieval.
Precautions and procedures for adding toner, including handling spilled toner.
Explains meanings of status icons indicating machine conditions or required actions.
Addresses common issues encountered during machine operation and their solutions.
General| Print Speed (Black) | 60 ppm |
|---|---|
| Print Speed (Color) | 60 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Copy Speed (Black) | 60 ppm |
| Copy Speed (Color) | 60 ppm |
| Copy Resolution | 600 x 600 dpi |
| Fax Resolution | 200 x 200 dpi |
| Duplex Printing | Yes |
| Automatic Document Feeder (ADF) | Yes |
| ADF Capacity | 100 sheets |
| Memory (RAM) | 2 GB |
| Hard Disk Drive | 320 GB |
| Type | All in One Printer |
| Scan Resolution | 600 dpi |
| Paper Capacity | 4, 700 sheets |
| Standard Paper Capacity | 1, 200 sheets |
| First Print Time (Color) | 5.5 seconds |
| Connectivity | USB, Ethernet |
| PDL | PCL 5c, PCL 6, PostScript 3 |
To Next Page
