Ricoh MP C6004 series User Manual

Problem Cause Solution
Documents and reports do
not print out.
The paper output tray is full. Remove the prints from the tray.
Documents and reports do
not print out.
There is no paper left. Load paper. For details about loading
paper, see "Loading Paper", Paper
Specifications and Adding Paper.
An error has occurred. A function which has the
status "Error Occurred" in
the [Check Status] screen is
defective.
Press [Check] in the function which the
error has occurred. Then read the
displayed message, and take the
appropriate action. For details about
error messages and their solutions, see
"When Messages Appear",
Troubleshooting.
You can use other functions normally.
The machine is unable to
connect to the network.
A network error has
occurred.
• Check that the machine is
correctly connected to the
network and that the machine is
correctly set. For details about
how to connect the network, see
"Connecting to the Interface",
Connecting the Machine/ System
Settings.
• For details about connecting to
the network, contact your
administrator.
• If the indicator lamp is still lit even
after you try to solve the problem
as described here, contact your
service representative.
10. Troubleshooting
188

Ricoh MP C6004 series Specifications

General

Print Speed (Black)	60 ppm
Print Speed (Color)	60 ppm
Print Resolution	1200 x 1200 dpi
Copy Speed (Black)	60 ppm
Copy Speed (Color)	60 ppm
Copy Resolution	600 x 600 dpi
Fax Resolution	200 x 200 dpi
Duplex Printing	Yes
Automatic Document Feeder (ADF)	Yes
ADF Capacity	100 sheets
Memory (RAM)	2 GB
Hard Disk Drive	320 GB
Type	All in One Printer
Scan Resolution	600 dpi
Paper Capacity	4, 700 sheets
Standard Paper Capacity	1, 200 sheets
First Print Time (Color)	5.5 seconds
Connectivity	USB, Ethernet
PDL	PCL 5c, PCL 6, PostScript 3